Features
- Data rate of 1.25Gbps
- 850nm VCSEL transmitter, PIN photo detector
- Maximum link length of 300m with 62.5/12µm MMF or 500m with 50/125 µm MMF
- Duplex LC Connector
- Digital Diagnostic Monitoring
Overview
The 1G SFP Multimode Fiber Optic Module is a 850nm VCSEL 10-Gigabit SFP and transceiver that is designed to transmit and receive optical data over 50/125 µm or 62.5/125 µm multimode optical fiber networks. This cost effective module supportws data-rates of 1.25Gbps and 550m transmission distance with MMF. The transceiver consistes of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with trans-impedance preamplified (TIA) and MCU control unit. All modules comply wityh Class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreemetn (MSA) and SFF-8472.
RECOMMENDED OPERATING RATING
- Power Supply Voltage 3.13 – 3.47 V
- Operating Case Temperature 0 ~ +70ºC
- Storage Temperature -40 ~ +85ºC
- Relative Humidity 5 ~ 95%
OPTICAL CHARACTERISTICS
- Center Wavelength 850nm
- Average TX Optical Power -9.5 ~ -3.5 dBm
- RX Sensitivity -18 dBm (Max.)
- Optical Connector Duplex LC
ELECTRICAL CHARACTERISTICS
-
-
- Data Rate 1.25 Gbps (typical)
- Power Consumption 1W (typical)
</ul >
OPERATING RANGE
-
-
-
- 62.5 µm MMF up to 300m
- 50 µm MMF up to 500m
</ul >
CERTIFICATIONS
GREEN COMPLIANCE
ORDER INFORMATION
- LBN-MSx-SFP-SX1G SFP Multimode Fiber Module
